have a ram stem mount, want a mcl stem nut with ram ball super bad but still am unable to purchase because of production problems. if i add a techmount, will my ran cradle for my gps fit ?? its a tomtom. also color Titanium or Silver ??
thanks.

http://www.ram-mount.com/Portals/0/Skins/NationalProducts/images/ramholto5iu1.jpg
thats the cradle i have, will it mount to the techmount ?
http://www.techmounts.com/products/index.php?page_function=detail&product_id=177

no thought about risers, I'm 5'9" and the bars seem good, i think.

thanks for the time,
Joel

I ended up going with the riser mounted RAM ball setup (Heli risers but very similar to Murph's in the link above) as I wanted a set of risers anyway and it was a no-brainer to incorporate the RAM mount rather than having to purchase a separate mount.  This setup gives you a lot more flexibility in positioning and height (with different length arms) so you can get it up in your line of sight while still being able to see your gauges.  You will need to purchase a ball adapter for the rear of your cradle though if you opt to go this route (see OregonLAN's first link above for the proper adapter).

Here's a shot of my setup from eye level in the riding position with the Heli risers, 6" RAM arm and Garmin GPSMap 60CSx.  My Garmin Nuvi 1390T sits about an inch higher, mainly due to the difference in where the ball adapter bolts onto the cradle.  One nice thing about the Heli risers I got is that there's a PowerLet outlet in the left riser so my GPS's power cord is super short and won't get tangled up in anything. 

http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=260

sweet!!! been trying for what feels like a year to get one of these setups.
thanks for the time guys,
Joel

  just got off the phone, looking like no chance in the near future.

Is that just a cap?

If you could find something large enough to replace the cap with (using the same threads), you could probably drill out the center and tap it to accept the RAM ball post.

Just a thought...

its a replacement nut, so you take the stock nut and replace it with this one. your idea is the same concept. 
i have a stem mount setup now, its http://www.ram-mount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045066045051052050085/Default.aspx but its a pain if i need to get the stem nut off. otherwise it works well.

You may want to consider this item also.
As you can see by the picture it has numerous mounting holes for your cradle.
Its very handy,for taking your device on and off the bike.

http://www.techmounts.com/products/index.php?page_function=detail&product_id=156

say if you could help the slow folks  how does this work. i cant seem to find any info on it.
i did get a call saying my cradle will fit perfect on the round mount.

thanks,
Joel