The C10, aka Kawasaki Concours - The Original > Accessories and Modifications - C10

Has anyone ever converted their headlight (9003) bulb to a newer LED style bulb?

<< < (2/2)

SteveJ.:

--- Quote from: ddavid on November 06, 2016, 08:55:15 AM ---Would you happen to have a part or model number for the Evitek LED light?

--- End quote ---

https://www.amazon.com/Evitek-Headlight-Bulbs-Motorcycles-9003/dp/B017M566T4

$47.99 for a pair.

PS. Sorry about my tardiness, good luck. I just put one in the low beam housing on my new Versys.  :thumbs:

mellow yellow:
I just use the sylvania silver star bulbs from walmart. my riding buddy said that my headlight was very bright.

mikeyw64:

--- Quote from: nevadazx12 on October 19, 2016, 07:11:21 PM ---I tried, the stumbling block was the retaining clip.  The big heat sink cooling fan portion of the bulb interferes too much with getting that clip hooked up properly.  I ended up going back and installing the H4 halogen.

--- End quote ---
Havent seen the back of a C10 headlight but I reckon from your description the ones I used on the C14 would get around this as the heat sink is removable for getting the clips on


http://www.zggtr.org/index.php?topic=22202.0

MAN OF BLUES:
Recent posting on our other forum had good revues on this

http://stores.advmonster.com/h4-r3-led-headlight/

And I can say I may try them out on my bikes when I need my next bulb...

Its a standard base, and uses less power, a win win...

datsaxman@hotmail.com:
Even the LEDs that do not have detachable housings will fit. 

It takes a little dexterity, but they will go on. 
You have to thread the wire in AS the LED is going in to the socket.  (easy now...)

The rubber boot might be a different story.  I trimmed mine back a bit.  Now they fit.


YMMV of course.

dsm

Navigation

[0] Message Index

[*] Previous page