Author Topic: 2001 Concours Parts bike  (Read 3311 times)

Offline tshelver

  • Newbie
  • *
  • Posts: 2
2001 Concours Parts bike
« on: May 16, 2011, 05:48:22 PM »
    2001 Concours in Lyme, NH.

    Motor is pretty reasonable has the following:

        Racetech emulators and 1.0 springs
        Rifle base (screen is broken but a new one can be made from Lexan or other
        Avon Azaros with low miles (probably under 500)
        brakes: 320mm Wave rotors, stainless lines and Carbonne Lorraine pads up front
        Helibars and Genmar risers: one upright on the Helis needs replacing
        Motor runs well, serviced at dealer, about 60,000 miles


    Offers on $500.

    Call Tony at 603.667.1883 or email tshelver at hotmail dot com.

Offline medicevans

  • Full Member
  • ***
  • Posts: 137
Re: 2001 Concours Parts bike
« Reply #1 on: May 16, 2011, 11:17:46 PM »
How much for just the rifle base?  I would like to try it out as I have a 25.5 CB and a 7-JuRock right now. 

Offline bigpigtx

  • Newbie
  • *
  • Posts: 18
Re: 2001 Concours Parts bike
« Reply #2 on: May 19, 2011, 08:28:44 PM »
If you part it out I could use the right drivers foot peg mounting bracket (I think it's part # 34003A). 
« Last Edit: May 20, 2011, 01:52:05 AM by bigpigtx »

Offline tvpierce

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • '99 Concours
Re: 2001 Concours Parts bike
« Reply #3 on: May 20, 2011, 08:30:41 AM »
FYI: Bike is sold... got an email from Tony yesterday.
I don't want a pickle... I just wanna ride my motorsickle.

Offline jodirumph

  • Newbie
  • *
  • Posts: 11
Re: 2001 Concours Parts bike
« Reply #4 on: May 20, 2011, 06:30:18 PM »
What is a rifle base?

Offline GF-in-CA

  • Jr. Member
  • **
  • Posts: 67
  • Country: 00
Re: 2001 Concours Parts bike
« Reply #5 on: May 20, 2011, 07:12:55 PM »
Gary F.
1998 C10
California North State

Offline jodirumph

  • Newbie
  • *
  • Posts: 11
Re: 2001 Concours Parts bike
« Reply #6 on: May 20, 2011, 11:27:32 PM »
Thanks for the informative response.

Offline tvpierce

  • Jr. Member
  • **
  • Posts: 76
  • Country: us
  • '99 Concours
Re: 2001 Concours Parts bike
« Reply #7 on: May 22, 2011, 05:50:18 AM »
I don't want a pickle... I just wanna ride my motorsickle.

Offline GF-in-CA

  • Jr. Member
  • **
  • Posts: 67
  • Country: 00
Re: 2001 Concours Parts bike
« Reply #8 on: May 23, 2011, 08:32:18 AM »
Now that's a farkle!  The cagers might think twice about cutting you off when they see one of those.  Kinda hard to work the throttle while shooting, though.   ;D
Gary F.
1998 C10
California North State

Offline medicevans

  • Full Member
  • ***
  • Posts: 137
Re: 2001 Concours Parts bike
« Reply #9 on: May 23, 2011, 09:18:36 AM »
Illustrates why you should never volunteer for the motorcycle corps. It's much easier to hit a moving target from a stationary position than a stationary target from a moving position.

Also, I've said for a long tim that I wish we had a tennis ball cannon , a la "American Gladiators", on the ambulance. You don't pull to the right and stop, a couple tennis balls on the back glass might get your attention!!

Offline SteveJ.

  • Arena
  • Full Member
  • ***
  • Posts: 806
  • Country: us
Re: 2001 Concours Parts bike
« Reply #10 on: May 27, 2011, 06:10:30 PM »
... Kinda hard to work the throttle while shooting, though.   ;D
Murphs' can fix you right up with what ya need. :thumbs:

http://www.murphskits.com/catalog/product_info.php?products_id=422
Perfection Is A Fantasy, Improvement Is Possible(Margie J)
America's Seaplane City
'99 Conk: 234k mi, '98 KLR650, both gone, '15 Versys 650LT: 74k mi
COG 5603, IBA 19921, CBMMA 50 (Cheap B@st@rds Motorcycle Maintenance Assoc, 18 year member)