Kawasaki Concours Forum

The C10, aka Kawasaki Concours - The Original => Accessories and Modifications - C10 => Topic started by: nos zg1000 on April 25, 2012, 06:02:22 PM

Title: 2001 connie 125hp nos fogger added pod filters now it has a bog from 2 to 6k rpm
Post by: nos zg1000 on April 25, 2012, 06:02:22 PM

bog only happens while running with the nos off when the nos is on it revs unbelievably well .only happened after adding pod air filters???? help am i lean ?should i shim the needles?carbs floats just set and carb was cleaned thouroughly?any ideas

Title: Re: 2001 connie 125hp nos fogger added pod filters now it has a bog from 2 to 6k rpm
Post by: bbroj on April 25, 2012, 06:36:52 PM

Read up on Steve's (aka SteveInSunnyFlorida or SISF) 2 minute Mod and you will find lots of evidence/reasons why pod filters are NOT the way to go on this bike.

Title: Re: 2001 connie 125hp nos fogger added pod filters now it has a bog from 2 to 6k rpm
Post by: Steve in Sunny Fla on April 25, 2012, 07:47:07 PM

If you want to run pods, you'll need to get a dynajet jet kit, use thier way-to-rich needles and 134 main jets. It won't have the torque you'ld get with the airbox, but it won't fall on it's face either. Then spray as nesessary - steve

Title: Re: 2001 connie 125hp nos fogger added pod filters now it has a bog from 2 to 6k rpm
Post by: RFH87_Connie on April 26, 2012, 01:48:15 PM

Interesting first post.