Kawasaki Concours Forum
Marketplace => For Sale => Topic started by: T Cro ® on May 11, 2011, 08:03:00 PM
-
Stick Coil Kits with Plug & Play Wiring Harness can be had for those who want to bring their ZG1000 Concours (all years) up a notch or two in the age of new fangled technology.
Please know that this technology can be applied to numerous Kawasaki bikes from the same time area such as the ZRX, ZX, ZL etc...
Price is 130.00 with shipping included to all those in the US, 150.00 to those in Canada, and anywhere else the postman will deliver. Best to send me a PM, or contact me via email at tonypcro @ gmail . com (remove extra spaces) and we will close a deal. I prefer payment via PayPal but I'll gladly do Money Orders as well as Checks too.
For those interested I can usually sell you a harness only for 80.00 with shipping included...
-
T Cro's coils with air-injection removal will totally sanitize your Connie's engine-room :chugbeer:
(http://i1188.photobucket.com/albums/z419/mypicnow/Connie/topcoils600.jpg)
(http://i1188.photobucket.com/albums/z419/mypicnow/Connie/sidecoils600.jpg)
-
HAPPY CAMPER !!! :)
-
HAPPY CAMPER !!!
+1 on that! Installed my set this past weekend. Seems to have smoothed out the idle even more and cleans up the engine top side clutter immensely! Easy to retrofit and highly recommended mod! :thumbs:
-
I've got a workbench full of kits that are ready to set sail to a new harbor.....
Don't be shy belly up to the bar and order a shot!
I'd really like to buy a new chrome plated 45 so help me finance a new gun will ya please?
-
I want, let's make it happen, how do I do this?
Did I mention I'm new? Just bought a 2003 C10 and I have been farkling up a storm. New front tire, speed bleeders, EBC HH pads, stiffened up the preload in the front (previous owner weighed 125!). It's no sport bike, but it does make my FZ1 fee like a dirt bike when I get back on it, so there's that.
-
As of Sept 5 I'm out of stock; I'll be building another batch ASAP and will let y'all know when I've got set ready to go. As always y'all can pre-order or even pre-pay for a set if you want to be put at the very front of the production line.... Thanks to all, hope y'all is happy with your purchases!
-
Hello all please note that I must raise prices due to increases in the cost of material that goes into the making of the harness; as those who have bought my harness can attest the quality of these harness is beyond reproach and even at the new price they are still quite the bargain considering their construction.
New pricing for complete kits will be 120.00 with shipping included to all those in the US, 130.00 to those in Canada, and 140.00 to anywhere else the postman will deliver. For those interested I will sell you a harness only for 80.00 with shipping included to the US, and 90.00 to Canada. To which you can try your luck at snagging a set of coils on the cheap on eBay; I simply don't have the time to bid on the really cheap ones. When I buy coils I buy the best that I can find for the best price via the Buy It Now Feature or make purchases in bulk through breakers that I have trust in.
I will have another batch of 25 harness ready to go by the 12th of Oct to which please be aware that I will be on vacation come the 15th through the 22nd of Oct and there will be no shipping during those dates.
-
Tony:
Sent you an email, it bounced back. So the question is, do you have a set of your stick coils ready to ship. If yes, please do let me know soon.
Thanks
John
-
Tony:
Sent you an email, it bounced back. So the question is, do you have a set of your stick coils ready to ship. If yes, please do let me know soon.
Thanks
John
Yes I have kits ready to ship as we speak..... Email & PayPal to tonypcro @ gmail . com (remove extra spaces) please if you pay via PayPal use the GIFT option as their fees really add up; 120.00 to the US and 130.00 outside the US
-
I'd like one of the ZG1000 Stick Coil Kits. Still available at $120 USA (GIFT) to teecro @ sbcglobal . net?
-
I'd like one of the ZG1000 Stick Coil Kits. Still available at $120 USA (GIFT) to teecro @ sbcglobal . net?
That would be a YES.....
-
Tony
are these still available as a kit for $120. Not being a mechanic do they come with EASY to understand instructions or does it need to be done by someone else.
-
Tony
are these still available as a kit for $120. Not being a mechanic do they come with EASY to understand instructions or does it need to be done by someone else.
Yes.... Yes... No!
Might be a slight delay in shipping but for sure by mid next week.... BTW this will be the last kit for about 6 weeks as I've got to build more wiring harness and I only do that while I'm on board ship.
Very easy to install... Completely "plug & play" you can install in an easy hour with one or two beers tops.
-
Stock depleted.... Expect the next batch of 25 to be ready for shipment in about 6 weeks...
-
T
I did 26 years in the navy riding carriers. From your symbol I would say you ride tankers maybe. Far winds and following seas
-
T
I did 26 years in the navy riding carriers. From your symbol I would say you ride tankers maybe. Far winds and following seas
No military background here.... Have been a Merchant Mariner for the last 28 years and have been tramping the Great Lakes for the last 16 years as the Chief Engineer on a 550 foot self-unloading cement carrier; previous to that east coast oil barges and Gulf of Mexico oil rig support.
As to the symbol I just like Pegasus; reminds me of the Concours a horse that can fly.
-
As to the symbol I just like Pegasus; reminds me of the Concours, a horse that can fly.
And I thought your avatar was the Mobil gas logo turned around. Used to have a local station nearby where we bought our tractor's gas when I was (much) younger...
(http://www.autoaccessoriesgarage.com/img/group/main/38/3822_1_md.jpg)
-
As to the symbol I just like Pegasus; reminds me of the Concours a horse that can fly.
When did you get a C14?
-
When did you get a C14?
How about a draft horse that can haul ass...
-
I can go with that :)
-
Stick Coil Kits as well as harness only option available aplenty.....
The line for strong dependable starts and better running bikes starts right here!
-
The most recent post here is almost a year old, are the kits still available?
-
The most recent post here is almost a year old, are the kits still available?
Absolutely; I'd remove this thread if I was not still supporting the ZG1000 Concours....
Currently asking 125.00 delivered in the US; out of country pricing to be determined due to changes at the PO....
PM sent too...
-
One must remember that this is not T's full time job. Right now he's up to his neck in Tug engine parts... By the way, how is that going?
-
One must remember that this is not T's full time job. Right now he's up to his neck in Tug engine parts... By the way, how is that going?
You throw enough money and manpower at a burnt out engine room and it will all work and shine once again; we sailed out of the shipyard in early March and have been operational since then.
We are down for the next couple of days with unrelated repairs to our steering system as we developed cracks in a steering actuator...
-
You throw enough money and manpower at a burnt out engine room and it will all work and shine once again; we sailed out of the shipyard in early March and have been operational since then.
We are down for the next couple of days with unrelated repairs to our steering system as we developed cracks in a steering actuator...
Engine fire, cracks in a steering actuator.....what next, snakes in the hold?
-
Well, T-Cro sent me a set of coils and his custom harness. $140 to Canada.
I was keen to get them on so I ripped into it tonight
when I got home.
20 Minutes and I was cruising the hood on a test drive.
It sure starts nicer and the throttle roll on feels much smother.
All in all, a fine product and a very happy customer.
Thanks T-Cro
Best Regards,
Dan
1990 ZG1000 "Green Machine"
-
You are most welcome Dan; I guess the fact that I forgot to send directions was not much of a deterrent?
-
I really had no issues at all.
More people should go this way. It has smoothed the idle
out immensely.
Working in the Auto industry for the last 25 years helped me get
my head around it...
I wish I had thought of this.
-
I really had no issues at all.
Working in the Auto industry for the last 25 years helped me get
my head around it...
The one reason that I use the same color wires as the factory is that without thought we should want to put like colored wires together and if you do you have hooked up the wiring correctly when you install my harness.
We also think from left to right so again without thought we should want to place the # 1 wire on the left plug and so forth; but even if you thought from right to left and installed as such it still works just the same.... Thus making the harness just about a foolproof install that one would have to try very hard to install wrong ....
As to the left over red wire tape it up for a rainy day; as you can use it to switch a relay with the key to turn something else on/off.
The remaining black with yellow stripe is a ground wire; keep it out of the way or re-ground it to help strengthen the entire ground system on the bike.
-
Tony,
I just bought myself a 1987 Kawasaki ZL1000 and I've been told that the engine is the same as the C10 Concours. The ZL1000 is in need of spark plugs & wires and I am interested in your stick coils. Do you know if the stick coils will work and/or fit in the ZL1000?
Thanks, Bob T
-
Tony,
I just bought myself a 1987 Kawasaki ZL1000 and I've been told that the engine is the same as the C10 Concours. The ZL1000 is in need of spark plugs & wires and I am interested in your stick coils. Do you know if the stick coils will work and/or fit in the ZL1000?
Thanks, Bob T
Yes it will fit just fine.... But I'm out of stock and will unlikely have stock again for 6 weeks due to vacation and work sch.
-
Tony,
I just bought myself a 1987 Kawasaki ZL1000 and I've been told that the engine is the same as the C10 Concours. The ZL1000 is in need of spark plugs & wires and I am interested in your stick coils. Do you know if the stick coils will work and/or fit in the ZL1000?
Thanks, Bob T
You wouldn't happen to be in the vicinity of Columbia SC, would you?
-
I am from the Berkshires of western Mass. I just bought the bike and since it needs plugs & wires I am opting for the stick coils; plus winter is coming soon I am not going to register the ZL until I get the carbs done by SISF first.
Bob T
ps, Tony, let me know when you do have your stock of stick coils available. Thanks
-
Ok, just wondering as we had a ZL1000 for sale around here recently. I went and looked at it; seems like a decent bike, just not sure it was for me.
-
Just an update so that everyone knows that I'm still supporting the ZG1000 with the Stick Coil Conversion as well as the Heavy Duty Shift Linkage system.... Please contact by email at tonypcro @ gmail . com (remove spaces)
Stick Coil Kits with Wiring Harness is 130.00 with Shipping included here in the states, 150.00 out of the country...
-
Stupid question alert...just got my order in from Tony...what are the best plugs to use w/ this mod? Resistor or non-resistor? I Just put in DR8EA a few weeks ago, but that was with replacement resistor caps.....
-
Stupid question alert...just got my order in from Tony...what are the best plugs to use w/ this mod? Resistor or non-resistor? I Just put in DR8EA a few weeks ago, but that was with replacement resistor caps.....
Those will do just fine...
-
Hi can I order a set of coils for a zl900?
Thanks.
-
Hi can I order a set of coils for a zl900?
Thanks.
PM sent....
-
Sorry my friends,
Until further notice I'm unable to provide kits...
I have a limited number of harness only for 80.00 with shipping included...
If interested in harness only contact me via PM...