Steve, if you sprayed carb cleaner into assembled carbs you most likely did more damage. The slide diaphrams absolutely will not tolerate getting carb cleaner on them, they swell up like crazy, and then they won't lift the slides at all, effectively killing anything past idle.
BTW, when ethanol dries and clogs the pilots, it's just a tiny film over the orifice. since you're feeling stickiness, I hate to tell you, that's the tank sealer again. check the engine side of the carb throttle valves (butterflies) see if they have a haze on them that you can wipe off with some carb cleaner on a paper towel. If so, it's the tank epoxy again, just like last time.
The instructions that came with the carbs has info on using the tcw3 oil, and it's highly recommended. Good luck, Steve