Author Topic: FS: Knight Design offset foot pegs for C14 (Read 1812 times)

Charliedog · « **on:** July 05, 2019, 06:06:57 PM »

These were on the bike when I got it. KD says they lower the pegs 35 mm/1 3/8". I like the increased leg room but have a preference for round pegs like on a sport bike. I found some on eBay with even more drop, so these are for sale. Good condition. The right one has some pitting, like the PO took the bike off pavement a bit. Re-uses stock springs and pins. Takes less than five minutes to install.

Asking $60, including CONUS shipping. PayPal preferred. TIA

Charliedog · « **Reply #1 on:** July 21, 2019, 02:51:13 PM »

Bump for lower price. Now asking $60 including CONUS shipping. Nice increase in legroom, they work great.

CB Schmaltz · « **Reply #2 on:** April 24, 2020, 12:22:38 PM »

do you still have the KD pegs
what did you get on Ebay thats lower
thanxs
CB

Charliedog · « **Reply #3 on:** April 24, 2020, 01:08:08 PM »

Sorry. Sold.

Charliedog · « **Reply #4 on:** April 24, 2020, 01:10:29 PM »

Answered too quickly, there. I got round adjustable offset pegs on eBay. IIRC they were about the same drop, I just prefer round pegs-guess it's the sport bike rider in me...

lather · « **Reply #5 on:** April 24, 2020, 01:55:50 PM »

Is this wht you got? Have you ridden with them yet?

gPink · « **Reply #6 on:** April 24, 2020, 03:26:29 PM »

Lather, is there something backwards about that picture?

lather · « **Reply #7 on:** April 24, 2020, 03:39:00 PM »

Wow! Took me a minute to see what you were taking about. How did they do that?

lather · « **Reply #8 on:** April 24, 2020, 03:46:47 PM »

Try this

gPink · « **Reply #9 on:** April 24, 2020, 06:09:37 PM »

Questionable improvement?

CB Schmaltz · « **Reply #10 on:** April 24, 2020, 08:19:55 PM »

they are only 25 mm

lather · « **Reply #11 on:** April 24, 2020, 09:06:05 PM »

Yeah, apparently the ones Charliedog found were more than 35mm but I haven't found them. Hopefully he will post a link. Ebay search kinda sucks

Charliedog · « **Reply #12 on:** April 26, 2020, 11:52:00 AM »

Try searching for 'extended' foot pegs. There's some with 40mm drop. It's been so long I don't remember exactly what I got, but they sort of look the same. HTH

lather · « **Reply #13 on:** April 26, 2020, 06:53:22 PM »

Never found them until I added 40mm to my search

lather · « **Reply #14 on:** April 26, 2020, 07:27:05 PM »

Ordered a set. Look identical to the picture I posted except 40 mm instead of 25

Charliedog · « **Reply #15 on:** April 27, 2020, 12:30:13 PM »

They're nice to allow a slight fore-aft and lower range of position. The left one is limited by the edge of the rear shift pivot hitting the flat part of the peg mount when down shifting if you try to put the pegs too far forward. You can guess how I know this. And then the shift lever and the brake pedal will have to be re-positioned. And don't forget to adjust the switch for the brake light. You can also guess how I know this... In the end, tho, it is worth it-especially if a person has knee problems.

CB Schmaltz · « **Reply #16 on:** April 27, 2020, 06:54:41 PM »

OK I ordered a set also. Will use till I can find a set of genmar brakets. Ive got a red 09 should I get the red pegs or the balck, maybe the silver...... alohahahahaha

CB Schmaltz · « **Reply #17 on:** May 04, 2020, 04:51:52 PM »

Hey CharlieDog
I ordered some of those too
they look ok
BUT........ bolts are wrong size, some pins are missing and some holes need drilling and have to opened up
did you get yours
how where they
thanxs for your reply
aloha CB

Charliedog · « **Reply #18 on:** May 04, 2020, 07:24:54 PM »

Sorry to hear of your problems, I had none. I would suggest contacting the seller, maybe even send photos. Good luck.

lather · « **Reply #19 on:** May 04, 2020, 08:01:04 PM »

I ordered a set and 8nsyalled them today. Three boxes one for the pivots one for the arms and one for the pegs. My screws were correct sizes. There were 6 pins, you only need 4. Instructions were minimal.. the manufacturing workmanship seemed very good. not sure the design is perfect. Seems way less robust than OEM or other products I have tried. And the angle may be a bit off. I will post more after a test ride.

News:

Author Topic: FS: Knight Design offset foot pegs for C14 (Read 1812 times)