Kawasaki Concours Forum
Marketplace => Wanted => Topic started by: blue72beetle on May 23, 2020, 02:12:22 PM
-
Anyone in the US have a Steering Stem Socket they're not using anymore and would like to pass on?
I can paypal
(https://photos.smugmug.com/photos/i-bhkhVM3/0/e40f1ca2/O/i-bhkhVM3.jpg)
-
If not they are readily available on ebay from UK.
-
Yeah, I just don't want to wait on the long shipping time
-
Yeah, I just don't want to wait on the long shipping time
measure the nut, I don't have one handy, and pick a spanner from McMaster- Carr...
https://www.mcmaster.com/wrenches/spanner-wrenches/ (https://www.mcmaster.com/wrenches/spanner-wrenches/)
if you need to torque, (i.e. replacing existinf bearings with new ones), then add a 12" "cheater pipe" and use a fish scale to get the torque.. Lbs per Ft...
If you are just removing and greasing existing bearings, they do not require a "torque" on reassembly, just snug them back up and lock down..
Only time Torque is required, is on a "new bearing race/cup" install..
M/C delivers in 2 days or less.. deal with them all the time...