Replacement key blanks

[4cedars]

I did a search and apparently there is nothing on the new site about this yet. Does anyone remember the Ilco key model # for getting keys cut. The local key cutter I went to had Hillman key blanks and did not have the correct blank for the connie. He only had 1 listing for Kawasaki in general. I remember on the old site there was a very in depth thread.  Thanks, John   

[MrPepsi]

From the forum that is COG...

Keys

Key Blank - ILCO KW14R  Note: Double check your keys and this information. There seems to be two types of keys, beginning with either an "A" or "B". If you have an "A" key it should be a "KW14R" key-blank.  If you have a "B"  key, it should be an "KW14" key-blank. This was true on the 2008. But I'm not sure how they may be on newer models (so double check).
 http://www.mysecuritypro.com/index.asp?PageAction=VIEWPROD&ProdID=663

[So Cal Joe]

I went to a lock smith and he had the blank.

[4cedars]

Thanks Brent