Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => Accessories and Modifications - C10 => Topic started by: anycleavers on May 14, 2011, 08:01:31 PM
-
New guy here, and non technical to boot. Would I have to change any of the cabling to install 2" bar risers on my '97? Thanks
-
Usually not but expect to do some minor rerouting of cables and/or cutting of tight zip ties.
-
Yep... cut the cable ties, and make sure you move the choke cable OUTSIDE of the cable guide that's attached to the frame.
-
Might even have to slightly loosen the brake or clutch fitting as ever so slightly change their position and then re-tighten them.
-
I really like the ones on my bike.