Author Topic: Vance & Hines CS One on 2011? Part #? (Read 10349 times)

Zman · « **on:** June 25, 2011, 05:49:59 PM »

Greetings,

I think my pick of cans is the Vance & Hines CS One for my 2011....... The website does not mention 2011; but I think the right part number for black is 43511.

Anyone put one on a 2011 that can confirm?

Thanks in advance,

Z

MrPepsi · « **Reply #1 on:** June 25, 2011, 06:25:43 PM »

The CS One for the 2008 fits all years C-14.
They have put them on 2010, and they fit the 2011.

firetruck41 · « **Reply #2 on:** June 25, 2011, 06:34:24 PM »

they're on back order. i would like to know the noise level at cruising speeds, on diff exhaust.

MrPepsi · « **Reply #3 on:** June 25, 2011, 10:36:51 PM »

I cannot hear my CS One at cruzing speeds. Now, WOT is a different story.

mikeboileau · « **Reply #4 on:** June 26, 2011, 12:01:55 AM »

I like the way they look, never heard one though.

justbob · « **Reply #5 on:** June 26, 2011, 06:31:18 AM »

I like the way they look too but didnt like the build quality or the sound, sold mine.

2wheeltripn · « **Reply #6 on:** June 26, 2011, 08:20:15 AM »

I like the looks, build quality and sound of mine

Zman · « **Reply #7 on:** June 26, 2011, 09:49:50 AM »

Such a hard decision!!

I like the looks of the CS One the best; but, can't say that I don't like others almost as well.

At the risk of rehashing a similar thread; I'll put it out there, Has anyone done a definitive study on Db ratings of different brands and compared relative to stock?

Thanks in advance!!

Z

DocPigskin · « **Reply #8 on:** June 26, 2011, 10:52:49 AM »

Quote from: mikeboileau on June 26, 2011, 12:01:55 AM

I like the way they look, never heard one though.

Kawasaki Concours 14 Vance&Hines CS One exhaust
also vids of 2Brothers, Muzzy, Area P, and Remus exhausts on Youtube

Zman · « **Reply #9 on:** June 26, 2011, 11:56:22 AM »

Thanks Doc.....

Looks like you loose the stock heat deflector with the new pipe............

Pokey · « **Reply #10 on:** June 26, 2011, 12:24:29 PM »

I bet they arent really on backorder.....probably has more to do with their junk build quality.

Muzzy......2 Bros......Holeshot.....Leo Vince and Area P are the only ones to go with.

mikeboileau · « **Reply #11 on:** June 26, 2011, 04:11:36 PM »

Quote from: Zman on June 26, 2011, 11:56:22 AM

Thanks Doc.....

Looks like you loose the stock heat deflector with the new pipe............

What stock heat deflector?

firetruck41 · « **Reply #12 on:** June 26, 2011, 05:51:51 PM »

i had the area p on my 2008, got loud. there are just no real choices for the sound the concours should have and i'm not talking about zx14 sound. I might try the muzzy or holeshot, if i decide to install a muffler.

man i just want to be heard when i pull up beside or close to an auto.

Pokey · « **Reply #13 on:** June 26, 2011, 07:07:02 PM »

Quote from: firetruck41 on June 26, 2011, 05:51:51 PM

i had the area p on my 2008, got loud. there are just no real choices for the sound the concours should have and i'm not talking about zx14 sound. I might try the muzzy or holeshot, if i decide to install a muffler.

man i just want to be heard when i pull up beside or close to an auto.

Interesting......also very unlikely, especially due to the fact that AREA P uses the best packing "silent sport" that money can buy.

ZG · « **Reply #14 on:** June 26, 2011, 09:52:01 PM »

Quote from: mikeboileau on June 26, 2011, 04:11:36 PM

What stock heat deflector?

+1...

Zman · « **Reply #15 on:** June 27, 2011, 05:44:36 AM »

My '11 has a heat deflector / guard bolted on two studs over the slip joint......

After listening to the Youtube and online sound bytes of what I could find, and riding last night..... I think I like quiet too......

An ECU tune might move up the list................

Z

wally_games · « **Reply #16 on:** June 28, 2011, 11:53:00 AM »

Take a look at the Leo Vince SBK. There is a video on YouTube somewhere, just not sure at this second. It's the quietest (according to pipecity.com rep) and comes with the dB reducer already installed (which can be removed if you want louder). The dB reducer for the CS One is about $35-40 extra.

Having said that, I will likely go with the V&H with the reducer when I decide to drop the money.

Zman · « **Reply #17 on:** June 28, 2011, 12:33:02 PM »

I recieved the following reply from Vance and Hines today after I sent them an email asking them if they could produce a quieter version of the CsOne:

Quote

At the moment there are no plans of making something quiet, but we do take customer’s request in to consideration. I will forward this to our R&D department as a request and will keep you on our email list to inform you if we do come out with something.
--

Hector Montoya

I'd encourage you to send them an email and let them know you are interested in a quieter slip on for the Concours.

Lets start a email campaign.............

(Replace -AT- with @ in the below email addresses)

tech-AT-vanceandhines.com
sales-AT-vanceandhines.com
info-AT-vanceandhines.com

MrPepsi · « **Reply #18 on:** June 28, 2011, 12:58:11 PM »

NO mention of the quiet insert?
Strange. someone on here had purchased the insert.
It was $50 direct from V&H

mikeboileau · « **Reply #19 on:** June 28, 2011, 01:34:51 PM »

Quote from: MrPepsi on June 28, 2011, 12:58:11 PM

NO mention of the quiet insert?
Strange. someone on here had purchased the insert.
It was $50 direct from V&H

I know Two Bros has and insert, V&H does too?

News:

Author Topic: Vance & Hines CS One on 2011? Part #? (Read 10349 times)