Well, now this is helpful indeed!
I have a two line kit on mine, was on it when I bought it, and recently added risers.
Oddly enough, the line going to the left caliper is plenty long enough, but the right gets a bit tighter than Id like at full extension. I know thats not likely to happen on the road, and there is still a very little bit of give in the line, but not much.
Ive been thinking of redoing them, as the right line wraps around the fork tube, goes inside, then around and down, and I was going to make it a straight down run.
Looks like Id be better served to take the longer line, run it to the right caliper, or leave it on the left, and use the shorter of the two to run caliper to caliper.
I guess either would solve my problem!
Thanks for the idea Ken!