Banshee Horn, Plug & Play Screamer..

[Walker18]

I dont know how they come boxed when you purchase them, but I would think that the Post Office has a Priority Mail Flat Rate box that would work and those would be under $10.

The box size needed for the horn is the $11.45 one..


Ok folks! Shipping prices are being individually done for the best price. I cannot use the box from USPS because it's the same price for all ($11.45),
and some will save close to half by doing it this way. The break down will be in your message. Please review and send a check with your shipping info
for the total. I'll post you paid and send a message acknowledging payment. So far, it's going smooth, I plan on it to stay this way! Great communication with
the manufacturer, and with you all!

[Walker18]

Just a quick reminder for payments. The total participants for this group buy has surpassed our mark by almost triple!
The folks on the 'other' site are getting close to be 100% paid, and all orders need to be sent in together.

If you haven't received your total cost, with shipping email or PM, please let me know, and I'll re-send it..

[ninjawarrior1400]

Just ordered mine...96.71 including shipping.  Installed last night...horn works ok with stock horn, but only one hi beam flashes when horn blows....not both...on ZX14r....so don't know how to make it work...used a jumper wire and that did not work....

Pressing horn button 4 seconds burned up the control box.....they argued with me on the phone want me to drive my 14r 300 miles so they can try to figure out why their install instructions DO NOT work!

Took it to a electrical specialist and he told them their box was fried, and they argued with him ...two days old!

Good concept..did not work for me!

On the way back...!

[Walker18]

Just ordered mine...96.71 including shipping.  Installed last night...horn works ok with stock horn, but only one hi beam flashes when horn blows....not both...on ZX14r....so don't know how to make it work...used a jumper wire and that did not work....

Contact Peter at Banshee, he is the senior tech guru.. peter@screaming-banshee.com

[OCK913]

Just a quick reminder for payments. The total participants for this group buy has surpassed our mark by almost triple!
The folks on the 'other' site are getting close to be 100% paid, and all orders need to be sent in together.

If you haven't received your total cost, with shipping email or PM, please let me know, and I'll re-send it..

Now that the group buy deadline for ordering has past, I was wondering if there is an update? Did you place the order yet? Any time frame estimates?

[Walker18]

Now that the group buy deadline for ordering has past, I was wondering if there is an update? Did you place the order yet? Any time frame estimates?

Last couple of payments due in today, and the total Banshee payment will immediately follow. I'll keep you all informed right on through delivery.

[Walker18]

Thank you all! Payment sent today to Banshee, updates will be posted as I receive them.

[ljcorby]

Thanks.

[udoggie]

Just curious, what was the final total of horns ordered?

Now, the wait for mine to arrive!

Jeff

[ninjawarrior1400]

Got my defective control unit back from Clearwater Fla today.....it still does NOT flash both high beams....only one.  This is on the 2012 ZX14r.

Tried using a jump wire...unit kept lights on after engine switch was shut off, had to disconnect the jumper to make the lights go off!

They want me to send them a Kawasaki wiring diagram to try to figure it out.....seems like that should be the manufacturers responsibility....not the customer.....they are from UK, so that explains some things.

After it burned up last week they wanted me to dive the 14r 300 miles to them on a Friday afternoon so they could try to diagnose the problem..I said just send me another unit this one is defective...they refused, so had to return it for another new one...took another week to get the new one put back in tonight.....

Still same thing....only one high beam flashes, with horn activation.

[Walker18]

Got my defective control unit back from Clearwater Fla today.....it still does NOT flash both high beams....only one.  This is on the 2012 ZX14r.
Tried using a jump wire...unit kept lights on after engine switch was shut off, had to disconnect the jumper to make the lights go off!
They want me to send them a Kawasaki wiring diagram to try to figure it out.....seems like that should be the manufacturers responsibility....not the customer.....they are from UK, so that explains some things.
After it burned up last week they wanted me to dive the 14r 300 miles to them on a Friday afternoon so they could try to diagnose the problem..I said just send me another unit this one is defective...they refused, so had to return it for another new one...took another week to get the new one put back in tonight.....
Still same thing....only one high beam flashes, with horn activation.

I'm sure that Peter at Banshee wants to correct this problem, and being this system is new, some bugs have to be worked out as they appear, like in your situation. Give them a chance to correct this, it will be for the benefit of all ZX14r customers in the future! At least they were willing to work on your bike to rectify the problem, which is a whole lot more than most companies out there.. Would have worked out if you were closer, for sure.

[Pokey]

This seems like a much better choice.

[Walker18]

This seems like a much better choice.

And the headlight modulator is where?

[kzz1king]

Can these be hooked up to HID? If not could I hook it to my driving lights to make it flash on and off(even if lights are off to start)? Thanks
Wayne

[ninjawarrior1400]

Won't work with the HID.....HID needs a second to heat up and it is a H-4 bulb on the C-14 single element not dual, or two bulbs.  A shroud is moved forward and rearward via a magnet to activate hi and lo beams.

[ninjawarrior1400]

Pokey..

Tried the PIAA horns you posted 3 years ago on my 08, had to attach to the front fender side mount bolts....not very loud....they make great bulbs...but sorry horns..don't waste your time or money on these horns.

[Walker18]

Peter Olt posted an announcement 1 day ago

We’re nearing the end of our project’s funding period!
Today is your last chance to get a Plug & Play Screamer for $79! Don’t miss out! Remember to tell your social networks & club members to join in if they haven’t already.
Thanks again to everyone who has contributed and helped us spread the word, we couldn’t have done it without you all!
Cheers, and have a wonderful holiday season!
-Peter Olt
Screaming Banshee LLC

 
Peter Olt posted an announcement 8 days ago

We’ve reached our funding goal!
We’re really happy to announce that we have reached our funding goal of $8,600! Thank you so much to everyone who has contributed so far!
A big thank you goes out to Ben Coxworth of Gizmag for writing such a great article about the Plug & Play Screamer. Thank you for the great exposure!
http://www.gizmag.com/plug-play-screamer-motorcycle-horn/25047/
Another major thank you goes out to Jim from the Concours Owners Group forum who organized a group buy with his fellow forum members. Ultimately they were able to coordinate the purchase of 35 systems at the amazing discount of $59 for each system. Great work Jim!
We welcome any other groups, clubs or organizations to do the same and save everyone some cash!
We will be posting a technical update in the next coming days so stay posted all you techy guys.

[OCK913]

Is there any update on the status of this group buy? Have they shipped to you yet? Any estimate on when you will be shipping to us?

[ljcorby]

+1, could have used this horn multiple times already.   

[tjpgi]