Kawasaki Concours Forum
Marketplace => Wanted => Topic started by: bowtie39 on March 27, 2019, 04:33:05 PM
-
Doing a shock mod and wanting to add this rocker.
Thanks so much
-
Don't have one, but I can get you Norm's phone number if you want?
Which shock are you installing. If a ZZR, may not need a rocker.
Ride safe, Ted
-
Don't have one, but I can get you Norm's phone number if you want?
Which shock are you installing. If a ZZR, may not need a rocker.
Ride safe, Ted
Thanks but I've already contacted him.....I'm just too cheap to pull the trigger yet. Not ZZR. C14 shock
-
I'm curious if the Soupys adjustable links would work with the C-14 shock.
-
I'm curious if the Soupys adjustable links would work with the C-14 shock.
they don't have the "bow" offset, to fit astride that shock.
-
Thanks for noticing and comments! :)
-
I think I recall a member that built offsets to push the links further from the rocker. (would allow the links to clear the shock spring)
I will try to find that posting, but I think the offset would significantly increase the amount of load on the bolt that passes thru the rocker.
Ride safe, Ted
Update; Found the discussion. May work, but he was using the ZZR1200 shock when he did the mod.
http://forum.cog-online.org/tiressuspension-c10/yet-another-suspension-rebuild/msg652283/#msg652283 (http://forum.cog-online.org/tiressuspension-c10/yet-another-suspension-rebuild/msg652283/#msg652283)