Author Topic: do risers for 08/09 models fit the 10+?  (Read 2871 times)

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
do risers for 08/09 models fit the 10+?
« on: March 12, 2012, 04:26:19 PM »
The bars are the same right? Or aren't they??

Offline gPink

  • Arena
  • Hero Member
  • *****
  • Posts: 5686
  • Country: cn
  • MMVIII C XIV
Re: do risers for 08/09 models fit the 10+?
« Reply #1 on: March 12, 2012, 04:42:31 PM »
I would think the bars and bolt pattern is the same but the brake and clutch lines might be different.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8869
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #2 on: March 12, 2012, 05:36:29 PM »
The bars are the same right? Or aren't they??

The bars are compatible, to the best of my knowledge.
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline Kas

  • Jr. Member
  • **
  • Posts: 54
Re: do risers for 08/09 models fit the 10+?
« Reply #3 on: March 12, 2012, 06:06:18 PM »
They do fit, the issue is the clearance for the glove box mounted on the gas tank.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8869
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #4 on: March 12, 2012, 07:42:45 PM »
They do fit, the issue is the clearance for the glove box mounted on the gas tank.

Good point.  Although I don't think that is an issue EXCEPT for the new "Damn Potholes" risers http://www.zggtr.org/index.php?topic=7271.0  which have a big offset.
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: do risers for 08/09 models fit the 10+?
« Reply #5 on: March 12, 2012, 07:54:31 PM »
They do fit, the issue is the clearance for the glove box mounted on the gas tank.

 ???
I'm asking if 08/09 risers will fit on a 10+, the 10+ does not have the center glove box so I wouldn't think that would be an issue since there's even more room there on a 10+?? Or did I misread your post?  :-\

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8869
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #6 on: March 12, 2012, 08:11:18 PM »

 ???
I'm asking if 08/09 risers will fit on a 10+, the 10+ does not have the center glove box so I wouldn't think that would be an issue since there's even more room there on a 10+?? Or did I misread your post?  :-\

LOL!  He misread your topic, and I just followed along with it :)

The clearance issue would only be on using risers designed for 2010+ on an older model that still has the tank-mounted glovebox.  But the only risers I know of with an interfering offset like that would be the ones I mentioned, above.  I don't think it matters with any other "brand".
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: do risers for 08/09 models fit the 10+?
« Reply #7 on: March 12, 2012, 08:23:12 PM »
LOL!  He misread your topic, and I just followed along with it :)

The clearance issue would only be on using risers designed for 2010+ on an older model that still has the tank-mounted glovebox.  But the only risers I know of with an interfering offset like that would be the ones I mentioned, above.  I don't think it matters with any other "brand".

No worries, I fugured as much Max.
 
The risers in question are Genmar 1.5" risers that are from an 08, just confirming they'll work on LivnLoud's 11...

Offline 556ALPHA

  • Sr. Member
  • ****
  • Posts: 1284
  • Country: us
  • 2009 Candy Diamond Red
Re: do risers for 08/09 models fit the 10+?
« Reply #8 on: March 12, 2012, 08:29:49 PM »
Should be no reason they will not.  Only issues come when going from 2010 to 2009 due to box as stated.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8869
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #9 on: March 12, 2012, 08:33:48 PM »

No worries, I fugured as much Max.
 
The risers in question are Genmar 1.5" risers that are from an 08, just confirming they'll work on LivnLoud's 11...

Yep- Genmar is just a simple, straight-up riser.  Will fit any C14
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: do risers for 08/09 models fit the 10+?
« Reply #10 on: March 12, 2012, 09:18:35 PM »
Should be no reason they will not.  Only issues come when going from 2010 to 2009 due to box as stated.
Yep- Genmar is just a simple, straight-up riser.  Will fit any C14

Thanks for the help brutha's, that's the answer we were wanting to hear...  :grouphug:

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: do risers for 08/09 models fit the 10+?
« Reply #11 on: March 13, 2012, 07:25:57 AM »

Thanks for the help brutha's, that's the answer we were wanting to hear...  :grouphug:

+1