Kawasaki Concours Forum
The C-14, aka Kawasaki Concours-14, the new one :) => The Bike - C14/GTR 1400 => Topic started by: Elfmaze on April 18, 2012, 12:54:58 PM
-
I got my radiator hose rerouted. And everthing fits up on the right side..
What are the torque numbers for the two engine mount bolts?
-
So you're doing all this work and don't have a service manual?
Engine mounting nuts - (M12) - 44ft/lbs
Engine mounting bolts - (M10) - 44ft/lbs
Subframe bolts - 17ft/lbs
Now this is from a 2008 service manual and for a 2008 bike but I suspect that nothing has been changed in that area.
-
Hey, that is pretty good Jim. I thought for sure you were going to tell him to tighten the first one until it broke and the other one just a little bit less....
;D
Brian
So you're doing all this work and don't have a service manual?
Engine mounting nuts - (M12) - 44ft/lbs
Engine mounting bolts - (M10) - 44ft/lbs
Subframe bolts - 17ft/lbs
Now this is from a 2008 service manual and for a 2008 bike but I suspect that nothing has been changed in that area.
-
You know, I was actually thinking about that but decided not to....
-
So you're doing all this work and don't have a service manual?
I have one ordered but Mami Kawi is slow as dirt i got 600 miles done before she could ship a book
-
My favorite is to tighten until it snaps, then back off a quarter turn ;)
-
Excellent policy!
-
:hitfan:
-
My favorite is to tighten until it snaps, then back off a quarter turn ;)
I blame you.... http://www.zggtr.org/index.php?topic=8267.0 (http://www.zggtr.org/index.php?topic=8267.0)
-
Why I dont mess with crap like that. ;)
-
Excellent policy!
-
I'm sure $hit like this happens at the dealers too.... they just dont tell you about it. thats why you can't watch