« Reply #6 on: October 17, 2012, 09:24:21 PM »
If you have a 2nd gen C14, get yourself a ratcheting box end wrench for the upper right bolt to the brace. Not certain the size but I think it was 16mm. You can get a socket on it by squeezing the water hose but much easier with a ratcheting box end.
+1
Either that or cut the fairing (as shown in the other threads) so it is possible to wrestle the fairings on AFTER you install the bars.
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc