Kawasaki Concours Forum
The C10, aka Kawasaki Concours - The Original => The Bike - C10 => Topic started by: skidmarkrva on June 05, 2018, 06:46:38 PM
-
Need some info. Installing a set of tip over bars and need new hardware. I need to know the length of the motor mount bolts and the spacers for each side. If anyone has this info it'd be great.
-
No one?
-
you could call the man..
or,
https://www.murphskits.com/ (https://www.murphskits.com/)
https://www.murphskits.com/product_info.php?cPath=1_90&products_id=439&osCsid=oUU6-BEdeIoTrx5rRuvb81 (https://www.murphskits.com/product_info.php?cPath=1_90&products_id=439&osCsid=oUU6-BEdeIoTrx5rRuvb81)
http://forum.cog-online.org/murph's-kits/hardware-kit-for-front-tip-over-bars/ (http://forum.cog-online.org/murph's-kits/hardware-kit-for-front-tip-over-bars/)
-
I've tried contacting him before, no answer.
-
Sharing this for anyone else who cannot find it.
Upper motor mount replacement bolts are 3/8" x 5", spacers are 1 3/8" on one side and 7/8" on the other.
I'll share the info for the lowers if I find it. What I have found is that the spacers for the lowers are 5/8", but I don't have the bolt spec..yet.