« previous next »
  Go Down

Author Topic: Torque Cam install complete !!  (Read 3440 times)

Offline jim snyder

  • Arena
  • Full Member
  • ***
  • Posts: 565
  • Country: us
  • I'm married but my girlfriends name is Connie
Torque Cam install complete !!
« on: June 27, 2012, 02:02:38 PM »
Well after dragging my feet on doing Steve's Torque Cam install, I finally pulled the trigger and did it. The install
went very smooth. Steve's instructions were great as usual. After adjusting the valves and changing the main jets and doing a little break in, I took her for a little spin around the block. OMG !!! This thing is wicked fast !!!
The bike pulls like a monster from 2,000rpm and up. I can't keep my hand from twisting the throttle. Can't wait to get a dyno run on this thing and see just how much difference it made. I still have to do a little tuning on the air intake side but I can tell already this thing is going to be more fun than ever. Once again Steve in Sunny Florida has come up with another great product.
Logged
"Somedays you're the windshield, and somedays you're the bug"
"An armed citizen is a patriot, and unarmed citizen is a victim"

http://community.webshots.com/user/kawadude

Offline Tele130

  • Full Member
  • ***
  • Posts: 579
  • Country: us
Re: Torque Cam install complete !!
« Reply #1 on: June 28, 2012, 07:11:57 AM »
Sounds fun Jim.  So now your going to be a major contributor to the county revenue?   :rotflmao:

Have fun :thumbs:  Be sure to post up the Dyno report when you run it.   Sounds sweet!
Logged
Does this mean we get a "Re-Do" on life too?

Doug Colton
2006 Concours............nice ride!!!!!

Offline Daytona_Mike

  • Arena
  • Full Member
  • ***
  • Posts: 825
  • Country: us
Re: Torque Cam install complete !!
« Reply #2 on: June 28, 2012, 08:34:30 AM »
Darn it Jim. Now how am I going to I keep up with you?? 
You can now  understand  how lucky we Floridians are to  be living so close to Steve.
As we speak Steve is working on my bike to get it go even faster and it is all your fault.
Logged
If you still have fuel in the tank, you are not lost yet
Most motorcycle problems are caused by the nut that connects the handlebars to the saddle

Offline Two Skies

  • Arena
  • Full Member
  • ***
  • Posts: 213
  • Country: 00
  • Road? What road?!?
Re: Torque Cam install complete !!
« Reply #3 on: June 28, 2012, 10:32:04 AM »
Ahhh, the SISF Connie 'arms' race is alive and well!

"Man, my buddy just got SISF's jet kit, and now his Connie is now running circles around mine, so I need to get SISF's cams to put him back in his place..."

We are fortunate indeed to have 'Steve the Lawnmower Mekanik' coming up with such great stuff for our Connies.  Even if the foam in the airbox thing seems counterintuitive to 'normal' folk!
 ;D
Logged
2006 w/50,000+ miles and a few bruises.

MCL Fork Brace & Handlebar Risers.  Bergmen Quick Release Tank Kit, Pilot GT Front/Avon Venom Rear tire.  Trunk w/spoiler.  NGK DR8EIX plugs.  Piece of foam in airbox.  Beads on seat.  Bafflectomized.  Murphs Kneesavers & Fuse Block.  Cee Bailey Winscreen w/vent.  Heated grips.  'Custom' mirrors.

Offline snarf

  • Arena
  • Full Member
  • ***
  • Posts: 827
  • Country: 00
Re: Torque Cam install complete !!
« Reply #4 on: June 28, 2012, 10:39:11 AM »
Ahhh so many farkles; so little money  :-\
Logged
2002 Conc
1986 Conc "The spirit of COG"

"We did not become the men that we are because we were Sailors, soldiers or cops; we became Sailors, soldiers and cops because of the men we are."

Offline SteveJ.

  • Arena
  • Full Member
  • ***
  • Posts: 806
  • Country: us
Re: Torque Cam install complete !!
« Reply #5 on: June 28, 2012, 06:52:11 PM »
Quote from: Daytona_Mike on June 28, 2012, 08:34:30 AM
Darn it Jim. Now how am I going to I keep up with you?? 
You can now  understand  how lucky we Floridians are to  be living so close to Steve.
As we speak Steve is working on my bike to get it go even faster and it is all your fault.

Amen
Logged
Perfection Is A Fantasy, Improvement Is Possible(Margie J)
America's Seaplane City
'99 Conk: 234k mi, '98 KLR650, both gone, '15 Versys 650LT: 74k mi
COG 5603, IBA 19921, CBMMA 50 (Cheap B@st@rds Motorcycle Maintenance Assoc, 18 year member)

Offline jim snyder

  • Arena
  • Full Member
  • ***
  • Posts: 565
  • Country: us
  • I'm married but my girlfriends name is Connie
Re: Torque Cam install complete !!
« Reply #6 on: June 28, 2012, 09:09:54 PM »
Quote from: Daytona_Mike on June 28, 2012, 08:34:30 AM
Darn it Jim. Now how am I going to keep up with you?? 
 

Yeah now I will look like that guy in your avatar picture smoking the rear tire in the corners. (he-he)
Logged
"Somedays you're the windshield, and somedays you're the bug"
"An armed citizen is a patriot, and unarmed citizen is a victim"

http://community.webshots.com/user/kawadude

Offline kzz1king

  • Full Member
  • ***
  • Posts: 919
  • Country: us
Re: Torque Cam install complete !!
« Reply #7 on: June 29, 2012, 07:35:29 AM »
Video confirmation of that Jim will drive Steve's sales up!

Quote from: jim snyder on June 28, 2012, 09:09:54 PM
Yeah now I will look like that guy in your avatar picture smoking the rear tire in the corners. (he-he)

Logged
2010 CONCOURS
1974 Z-1
  Go Up
« previous next »