MC enterprises rear tip over protection blocking rear footpegs

[riverbound51]

I know this information was on the "lost" site.

I need footpeg extenders for the rear so that a passenger can use them.  Someone had just posted the info....  is Motorcycle Larry the place to go for these?  Is there a stock or part number I should be googling?  I don't want to do the trial and error on this as I am getting ready for a trip.

Thanks for any help. 

[Armyguns]

I know this information was on the "lost" site.

I need footpeg extenders for the rear so that a passenger can use them.  Someone had just posted the info....  is Motorcycle Larry the place to go for these?  Is there a stock or part number I should be googling?  I don't want to do the trial and error on this as I am getting ready for a trip.

Thanks for any help.

MCL is one source.  This is another: 

http://vixfix.com/GTR.htm

I have these and the MC Enterprise rear bars.  No interference with the bars.  I like the option of having 3 different peg mounting heights.  1 inch, 2 inches and 3 inches lower than stock.  Also the pegs are significantly longer (wider?) than stock, however we have found the 3 inch drop works best for my wife.  She made the observation that the new pegs are a lot better.  That's good enuf for me. 

[bob14]

so Army with the rear pegs lowered ( already done) is there any leg contact or issue ?
My wife unit loves the pegs and I want the bars but if Mama ain't happy ... you know

[Armyguns]

so Army with the rear pegs lowered ( already done) is there any leg contact or issue ?
My wife unit loves the pegs and I want the bars but if Mama ain't happy ... you know

So far, no complaints.   I don't have the time until Sunday to take pics, but I will post side and top-down views to show the offset between the bars and pegs.  The vixfix kit lowers and moves the peg forward, perhaps an inch forward from stock.  At first I was concerned about wife's foot hitting my calf, but that just isn't a problem.

We don't have a lot of two up saddle time (maybe 150 miles over two outings) yet, but so far-all is good. 

[riverbound51]

Thanks.  I'll try the "vixfix" model.

[Armyguns]

Here's  pics of the vixfix pegs with the MC Enterprise rear bars.  As you will see, the stock bars would not be usable with the MC Enterprise bars. 

[Armyguns]

A couple more views

[Armyguns]

Last one.

[AKwhite]

I know this information was on the "lost" site.

I need footpeg extenders for the rear so that a passenger can use them.  Someone had just posted the info....  is Motorcycle Larry the place to go for these?  Is there a stock or part number I should be googling?  I don't want to do the trial and error on this as I am getting ready for a trip.

Thanks for any help.

Found another alternative to lower them passenger pegs with these ;

http://projektd.com/product_info.php?cPath=27_39&products_id=132

not sure if the picture link will show up too ;

http://projektd.com/images/products/framework/gtr1400concours14/115_01b_p.gif