Author Topic: ARE Genmar style foot peg lower brakets still made for C14  (Read 1160 times)

Offline CB Schmaltz

  • Jr. Member
  • **
  • Posts: 78
  • Country: 00
  • FLY RIDE SKI SAIL
    • www.BuyNWProperty.com
I got rearended on my 09 C14 at a stop sign. Lucky I had Moto sliders.  Bikes  not too bad a couple scuffs on the mirrior, but the right genmar style foot peg lowering braket is toast. Been looking on the interweb dont see them for 2nd gens anywhere. I figure Ill need to buy a new set but dont see em. Any help or ideas would be great. Tried Knights but their 1 3/8 lower peg is really only about an inch. Thanxs
CB Schmaltz, Hood River, Or
503 806 1525
Connie 14, &  KLR best 2 bikes in the world.
Others in the stalls, VROD, WR250r,  Shadow Spirt, Versys 650, CRF250l, Vsrtom , 75 Z1B

Offline VirginiaJim

  • Administrator
  • Elite Member
  • *****
  • Posts: 11333
  • Country: england
  • I've forgotten more than I'll ever know...
    • Kawasaki 1400GTR
Re: ARE Genmar style foot peg lower brakets still made for C14
« Reply #1 on: April 24, 2020, 08:54:03 AM »
You may want to post in the Wanted section as well...good luck!
"LOCTITE®"  The original thread locker...  #11  2020 Indian Roadmaster, ABS, Cruise control, heated grips and seats/w/AC 46 Monitoring with cutting edge technology U.N.I.T is Back! Member in good standing with the Knights of MEH.

Offline CB Schmaltz

  • Jr. Member
  • **
  • Posts: 78
  • Country: 00
  • FLY RIDE SKI SAIL
    • www.BuyNWProperty.com
Re: ARE Genmar style foot peg lower brakets still made for C14
« Reply #2 on: April 24, 2020, 10:23:55 AM »
thanxss ...and done
CB Schmaltz, Hood River, Or
503 806 1525
Connie 14, &  KLR best 2 bikes in the world.
Others in the stalls, VROD, WR250r,  Shadow Spirt, Versys 650, CRF250l, Vsrtom , 75 Z1B

Offline robertv

  • Jr. Member
  • **
  • Posts: 92
  • Country: us
  • 2008 C14 Silver
Re: ARE Genmar style foot peg lower brakets still made for C14
« Reply #3 on: April 24, 2020, 01:53:55 PM »
Murph's has lowering footpegs => https://www.murphskits.com/product_info.php?cPath=130_133&products_id=401&osCsid=1wDP8lmqqbgzYxfJb7Kpt0

Regarding the Knight Design footpegs, so the 1 - 3/8" wasn't enough? I'm curious as I just ordered the 3/8" (10mm).


Offline CB Schmaltz

  • Jr. Member
  • **
  • Posts: 78
  • Country: 00
  • FLY RIDE SKI SAIL
    • www.BuyNWProperty.com
Re: ARE Genmar style foot peg lower brakets still made for C14
« Reply #4 on: April 24, 2020, 02:09:00 PM »
KD was not enough for me the 1 3/8.  Ive got a 34 inseam. Wish I could find out what happened to Genmar but them and Motorcycle Laryy seem to be MIA
CB Schmaltz, Hood River, Or
503 806 1525
Connie 14, &  KLR best 2 bikes in the world.
Others in the stalls, VROD, WR250r,  Shadow Spirt, Versys 650, CRF250l, Vsrtom , 75 Z1B