Kawasaki Concours Forum

The C10, aka Kawasaki Concours - The Original => Accessories and Modifications - C10 => Topic started by: anycleavers on May 14, 2011, 08:01:31 pm

Title: 2" bar risers
Post by: anycleavers on May 14, 2011, 08:01:31 pm
New guy here, and non technical to boot. Would I have to change any of the cabling to install 2" bar risers on my '97? Thanks
Title: Re: 2" bar risers
Post by: T Cro ® on May 14, 2011, 08:18:09 pm
Usually not but expect to do some minor rerouting of cables and/or cutting of tight zip ties.
Title: Re: 2" bar risers
Post by: dvitous on May 14, 2011, 09:07:40 pm
Yep... cut the cable ties, and make sure you move the choke cable OUTSIDE of the cable guide that's attached to the frame.
Title: Re: 2" bar risers
Post by: T Cro ® on May 14, 2011, 09:23:06 pm
Might even have to slightly loosen the brake or clutch fitting as ever so slightly change their position and then re-tighten them.
Title: Re: 2" bar risers
Post by: DarrellB on May 14, 2011, 10:14:55 pm
I really like the ones on my bike.