Author Topic: ZG's full Ohlins setup and powder coat project  (Read 66735 times)

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: ZG's full Ohlins setup and powder coat project
« Reply #80 on: August 30, 2012, 04:13:02 PM »
No way Chet, I ride year round brutha!

You can't count the one sunny 40 degree day every other month in the winter as riding year round!

What time you pickin'r up tomorrow? I'll be out by 10 or 11 and ready for a short ride.


Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #81 on: August 30, 2012, 04:16:10 PM »
You can't count the one sunny 40 degree day every other month in the winter as riding year round!

What time you pickin'r up tomorrow? I'll be out by 10 or 11 and ready for a short ride.

As long as it aint pouring rain I'll ride, even if that means in upper 20's temps on the way into work, as long as no lingering ice of course...  :)
 
Not sure about tomorrow, but will give you a shout Gumbi...  :chugbeer:

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #82 on: August 30, 2012, 07:34:44 PM »
Getting closer... swing arm, rear shock, forks, and bars are done...  :) 8) :thumbs:
 
 

 

 

 

 

 

 

 

Offline Jeremy Mitchell

  • Sr. Member
  • ****
  • Posts: 1756
  • Country: 00
  • COG#9899
Re: ZG's full Ohlins setup and powder coat project
« Reply #83 on: August 30, 2012, 07:42:32 PM »
Jay, may the fleas of a thousand camels invade your underwear drawer.















 ;D

Can you tell I'm just a little jealous?   ;)

Looking great, now get back over to your mechanic's garage with some beer so he can finish it up.
Keeping the economy going, one tank of fuel and two tires at a time.

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #84 on: August 30, 2012, 08:08:06 PM »
Jay, may the fleas of a thousand camels invade your underwear drawer.

 ;D

Can you tell I'm just a little jealous?   ;)

Looking great, now get back over to your mechanic's garage with some beer so he can finish it up.

 
 :rotflmao:   :thumbs:
 
Thanks JM!  :)   :chugbeer:

Offline quickwilly

  • Jr. Member
  • **
  • Posts: 40
  • Country: us
  • Meh
Re: ZG's full Ohlins setup and powder coat project
« Reply #85 on: August 30, 2012, 08:40:50 PM »
looks like Stacy (it is Stacy, right??) is having much fun putting it together.
2009 Connie
2000 ZX-12R

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #86 on: August 30, 2012, 09:27:39 PM »
looks like Stacy (it is Stacy, right??) is having much fun putting it together.

Yep, that's Stacey indeed Wil, good eye (he's the best damn tech in the entire PNW IMO)! Broken foot and all I do get the feeling he is very much enjoying this project!  :thumbs: :)
 
I was telling him today that it must be frustrating for him knowing that when completed he wouldn't even get to do the first test ride, his comment was "I think I might just take this cast off and do it anyways"...  ;D

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #87 on: August 30, 2012, 09:36:48 PM »
Jay, you remind me of a new father-to-be in the maternity ward.  ;D

Indeed GP, indeed! Cigars are on me brutha's!  :)   :chugbeer:

Offline rcannon409

  • Full Member
  • ***
  • Posts: 619
Re: ZG's full Ohlins setup and powder coat project
« Reply #88 on: August 31, 2012, 06:33:05 AM »
The forks are beautiful and I cannto wait for a ride report.  It looks like it might get finished today???????

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #89 on: August 31, 2012, 10:00:47 AM »
The forks are beautiful and I cannto wait for a ride report.  It looks like it might get finished today? ??? ???

Thanks RC, I'm hopefull for today but this project is taking a little longer than expected due to all the little details... If it get's done today that would be great, but I also told them I'd rather it be perfect than rush it... So if it takes till tomorrow I guess so be it at this point... :-\
 

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #90 on: August 31, 2012, 11:37:50 AM »
Almost done...  :)
 
I'm glad I added in the carbon fiber rear hugger too, it blends in real nice IMO with the black swing arm and should go very nicely with the carbon fiber dual Muzzys...  8)
 

 

 

Offline Conrad

  • Hero Member
  • *****
  • Posts: 5822
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #91 on: August 31, 2012, 11:50:02 AM »
Damn J, with ALL that black on your bike it's going to be SO SLOW, you'll need a Silverdammit in front of you to make a hole in the wind just so you can get moving.    ;)
Northern Illinois   Silverdammit '08 C-14 ABS

"Don't bother me with facts, Son. I've already made up my mind." -Foghorn Leghorn

Offline RBX QB

  • Full Member
  • ***
  • Posts: 504
  • Country: 00
Re: ZG's full Ohlins setup and powder coat project
« Reply #92 on: August 31, 2012, 11:54:31 AM »
I'm pretty sure I hate you now... but only because I love the way your bike is turning out, and it makes me want to rob a bank win the lottery... or work harder (ummm, yeah).
2011 Concours 14 ABS
2̶0̶0̶6̶ ̶D̶u̶c̶a̶t̶i̶ ̶M̶o̶n̶s̶t̶e̶r̶ ̶S̶2̶R̶D̶  SOLD

Offline Conrad

  • Hero Member
  • *****
  • Posts: 5822
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #93 on: August 31, 2012, 12:17:58 PM »
I'm pretty sure I hate you now... but only because I love the way your bike is turning out, and it makes me want to rob a bank win the lottery... or work harder (ummm, yeah).

Maybe we can get J to adopt us?  :)
Northern Illinois   Silverdammit '08 C-14 ABS

"Don't bother me with facts, Son. I've already made up my mind." -Foghorn Leghorn

Offline mikeboileau

  • Arena
  • Full Member
  • ***
  • Posts: 804
  • Country: us
  • It ain't easy bein cheesy....
Re: ZG's full Ohlins setup and powder coat project
« Reply #94 on: August 31, 2012, 12:21:00 PM »
He's making a slow colored bike even slower.......

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: ZG's full Ohlins setup and powder coat project
« Reply #95 on: August 31, 2012, 12:36:54 PM »
Maybe we can get J to adopt us?  :)

 :rotflmao:
 
 ;D ;D ;D :thumbs:

Offline RBX QB

  • Full Member
  • ***
  • Posts: 504
  • Country: 00
Re: ZG's full Ohlins setup and powder coat project
« Reply #96 on: August 31, 2012, 12:56:49 PM »
Maybe we can get J to adopt us?  :)


I think we have to be minors, and not just immature.
2011 Concours 14 ABS
2̶0̶0̶6̶ ̶D̶u̶c̶a̶t̶i̶ ̶M̶o̶n̶s̶t̶e̶r̶ ̶S̶2̶R̶D̶  SOLD

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: ZG's full Ohlins setup and powder coat project
« Reply #97 on: August 31, 2012, 01:17:21 PM »

not just immature.

What's wrong with that?

Offline 556ALPHA

  • Sr. Member
  • ****
  • Posts: 1284
  • Country: us
  • 2009 Candy Diamond Red
Re: ZG's full Ohlins setup and powder coat project
« Reply #98 on: August 31, 2012, 01:24:26 PM »
Sick.  Enough said.  I think Jay needs his own category under Accessories.   The Bike.  Accessories and Mods and then Insanity. 

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: ZG's full Ohlins setup and powder coat project
« Reply #99 on: August 31, 2012, 01:57:16 PM »
Sick.  Enough said.  I think Jay needs his own category under Accessories.   The Bike.  Accessories and Mods and then Insanity.

+1