« previous next »
Pages: 1 2 »   Go Down

Author Topic: Let's talk footpegs  (Read 10384 times)

Offline Snype

  • Jr. Member
  • **
  • Posts: 98
Let's talk footpegs
« on: March 20, 2013, 09:59:40 PM »
I need some aftermarket foot-pegs.  Primarily for the pylon.  She says the height is fine, but the length of the peg sucks.  They are kind of that way for the rider as well.. worst pegs on a bike I've ever had. 

So.. What are the  stylish riders using???

Snype
Logged

Offline jamiemac

  • Full Member
  • ***
  • Posts: 605
  • Country: us
Re: Let's talk footpegs
« Reply #1 on: March 20, 2013, 10:29:02 PM »
I'm pretty sure some people are using C10 passenger pegs on the back of their C14s. As for rider pegs, there are lots of options. Murphs pegs are the best looking, in My opinion, while some people are using Buell pegs, which would be the more frugal solution.
Logged
2008 C14, Area-P carbon fiber, PCV, Rostra Cruise, LAAM leather seat, Optilux 1500 & MondoMoto MM10 lights, Cee Bailey windshield, BMC air filter, Warm & Safe dual dash mounted heat troller.

Offline stevewfl

  • Arena
  • Hero Member
  • *****
  • Posts: 4268
  • Country: 00
Re: Let's talk footpegs
« Reply #2 on: March 20, 2013, 10:30:27 PM »
My gal does 800 mile days on my stockers. But she's tiny so the pegs may not be an issue

Logged
“The World is a book, and those who do not travel read only a page.” St. Augustine

Offline cablebandit

  • Full Member
  • ***
  • Posts: 269
Re: Let's talk footpegs
« Reply #3 on: March 21, 2013, 08:09:19 AM »
Make sure whatever you do that the pegs have rubber tops.  It makes all the difference in the world.

Logged

Offline Rhino

  • Arena
  • Hero Member
  • *****
  • Posts: 3963
  • Country: us
Re: Let's talk footpegs
« Reply #4 on: March 21, 2013, 09:42:16 AM »
No idea about the rears but I'm fine with my stock pegs.
Logged

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: Let's talk footpegs
« Reply #5 on: March 21, 2013, 09:58:18 AM »
Buell XB12XT pegs.



Logged

Offline CADMAN97

  • Full Member
  • ***
  • Posts: 236
  • Country: us
  • 2010 C14 ABS
Re: Let's talk footpegs
« Reply #6 on: March 21, 2013, 10:21:40 AM »
Yamaha FJR pegs! I use these as my passenger pegs, & they have the rubber pad on top. They work great & you'd never know they are from a different bike. I use these along with peg extensions for my wife, although she prob would be ok without the extensions considering she is 5'4", but does like the extra room.  Ca'mon Kaw, just spend the $$ & give our passengers decent pegs!
Logged
1998 Honda Magna--->Sold | 2003 Yamaha FZ1--->Sold | 2003 Honda VFR800--->Sold | 2010 Honda VFR1200--->Sold | Kawasaki C14--->SOLD | 2012 Kawasaki Ninja 1000--->Current | 2014 Yamaha FJR 1300ES--->Current

Offline OCK913

  • Arena
  • Full Member
  • ***
  • Posts: 363
  • Country: us
    • The Orlando Riders Club
Re: Let's talk footpegs
« Reply #7 on: March 21, 2013, 12:17:29 PM »
Quote from: Gumby on March 21, 2013, 09:58:18 AM
Buell XB12XT pegs.


Me likey?  Where can I get 'em?
Logged
.............................................................
            2009 Kawasaki C14 - Black

Offline speed545

  • Full Member
  • ***
  • Posts: 169
  • Country: ca
Re: Let's talk footpegs
« Reply #8 on: March 21, 2013, 12:23:33 PM »
I ll jump in  ;)

I was sure a saw a post about mini floor boards for passenger from Kuryakyn but cant find it

I know witch floorboard i want, i m just trying to find the part # for the adaptor

Some site says 8845 and other 8830

Does anyone knows

 
Logged
08, Concours 14
Montreal Fire Dept

Offline speed545

  • Full Member
  • ***
  • Posts: 169
  • Country: ca
Re: Let's talk footpegs
« Reply #9 on: March 21, 2013, 12:25:53 PM »
Quote from: speed545 on March 21, 2013, 12:23:33 PM
I ll jump in  ;)

I was sure a saw a post about mini floor boards for passenger from Kuryakyn but cant find it

I know witch floorboard i want, i m just trying to find the part # for the adaptor

Some site says 8845 and other 8830

Does anyone knows

Think i found it

8845
Logged
08, Concours 14
Montreal Fire Dept

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: Let's talk footpegs
« Reply #10 on: March 21, 2013, 12:44:54 PM »
Logged

Offline Bryn

  • Jr. Member
  • **
  • Posts: 92
  • Country: gb
  • Leicestershire.... in the heart of England
Re: Let's talk footpegs
« Reply #11 on: March 21, 2013, 01:50:57 PM »
Quote from: CADMAN97 on March 21, 2013, 10:21:40 AM
Yamaha FJR pegs! I use these as my passenger pegs, & they have the rubber pad on top. They work great & you'd never know they are from a different bike. I use these along with peg extensions for my wife, although she prob would be ok without the extensions considering she is 5'4", but does like the extra room.  Ca'mon Kaw, just spend the $$ & give our passengers decent pegs!

Do FJR pegs fit straight on?

Thanks  8)
Logged

Offline OCK913

  • Arena
  • Full Member
  • ***
  • Posts: 363
  • Country: us
    • The Orlando Riders Club
Re: Let's talk footpegs
« Reply #12 on: March 21, 2013, 02:17:10 PM »
Quote from: Gumby on March 21, 2013, 12:44:54 PM
Harley somethin ruther store or EBay.

Rider pegs - part #N0006.1A
Passenger pegs - part # N0042.1AK


Thanks Gumby .... are they a straight bolt on fit or are there any mods needed? I am going to stop by the Harley dealer tomorrow and see what they would cost me. If I stop in while I am working I will get a discount.  ;D
Logged
.............................................................
            2009 Kawasaki C14 - Black

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: Let's talk footpegs
« Reply #13 on: March 21, 2013, 02:32:19 PM »
Quote from: OCK913 on March 21, 2013, 02:17:10 PM
Thanks Gumby .... are they a straight bolt on fit or are there any mods needed? I am going to stop by the Harley dealer tomorrow and see what they would cost me. If I stop in while I am working I will get a discount.  ;D
I ground a little bit off of the passenger pegs so they would fold up, other than that pretty much a plug'n'play.

If I remember correctly the ones on EBay are cheaper then you can get them at a Harley shop. Maybe not with your discount. I happened to have a Buell XB12XT when I bought my Connie, so I just traded pegs.  ;D
Logged

Offline CADMAN97

  • Full Member
  • ***
  • Posts: 236
  • Country: us
  • 2010 C14 ABS
Re: Let's talk footpegs
« Reply #14 on: March 21, 2013, 02:38:02 PM »
Quote from: Bryn on March 21, 2013, 01:50:57 PM
Do FJR pegs fit straight on?

Thanks  8)
I would imagine they do, but can't say for sure since I've never actually installed em right to the concours mounts. They've always been in the extensions. I would think pegs are pretty universal between manufactures, but maybe not?? 
Logged
1998 Honda Magna--->Sold | 2003 Yamaha FZ1--->Sold | 2003 Honda VFR800--->Sold | 2010 Honda VFR1200--->Sold | Kawasaki C14--->SOLD | 2012 Kawasaki Ninja 1000--->Current | 2014 Yamaha FJR 1300ES--->Current

Offline jayke

  • Full Member
  • ***
  • Posts: 170
Re: Let's talk footpegs
« Reply #15 on: March 21, 2013, 03:00:19 PM »
Not the most stylish, but C10 passenger pegs fit in place of the C14 passenger pegs.  I had them on my C14 for several years.  Just make sure you get all the C10 hardware.
Logged

Offline Bryn

  • Jr. Member
  • **
  • Posts: 92
  • Country: gb
  • Leicestershire.... in the heart of England
Re: Let's talk footpegs
« Reply #16 on: March 21, 2013, 03:05:05 PM »
Quote from: CADMAN97 on March 21, 2013, 02:38:02 PM
I would imagine they do, but can't say for sure since I've never actually installed em right to the concours mounts. They've always been in the extensions. I would think pegs are pretty universal between manufactures, but maybe not??
They will be going on extensions...  So probably will fit in that case....  :)
Logged

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8869
  • Country: us
  • 2011 Silver
Re: Let's talk footpegs
« Reply #17 on: March 21, 2013, 04:11:06 PM »
Quote from: Rhino on March 21, 2013, 09:42:16 AM
No idea about the rears but I'm fine with my stock pegs.

Yep.  I am not even sure I still have rears on mine (since it will NEVER have a passenger).  I find the front/rider/driver stock pegs to be just fine.

UPDATE:  Yep, I removed them when I added the rear bars and didn't bother putting them back on.
Logged
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline CADMAN97

  • Full Member
  • ***
  • Posts: 236
  • Country: us
  • 2010 C14 ABS
Re: Let's talk footpegs
« Reply #18 on: March 21, 2013, 07:35:19 PM »
Quote from: Bryn on March 21, 2013, 03:05:05 PM
They will be going on extensions...  So probably will fit in that case....  :)
Here ya go...

I think I bought mine from another owner here on the forum, but you can get them here...
http://www.motorcyclelarry.com/index.php?main_page=product_info&cPath=46_59&products_id=158

Here's a pic of mine...
Logged
1998 Honda Magna--->Sold | 2003 Yamaha FZ1--->Sold | 2003 Honda VFR800--->Sold | 2010 Honda VFR1200--->Sold | Kawasaki C14--->SOLD | 2012 Kawasaki Ninja 1000--->Current | 2014 Yamaha FJR 1300ES--->Current

Offline connie1

  • Arena
  • Full Member
  • ***
  • Posts: 182
  • Country: ca
Re: Let's talk footpegs
« Reply #19 on: March 21, 2013, 09:56:42 PM »
I have a question for those who have the extensions.
Do the pillion's feet interfere with the riders?  I've got size 12's and ride with either my arches or the balls of my feet on my lowered pegs. I did an estimation of where the extensions might put the pegs and it seems like the passenger feet would be bumping my legs (I may have estimated wrong). 
Any input would be appreciated.
Logged
Man do I love this bike! Red '09
Pages: 1 2 »   Go Up
« previous next »