Paging Man of Blues..
Riding around today, noticed oil smell from the exhaust. Some digging points me towards the camshaft position sensor. A little bit of searching later, I found out about MOB's seals sold on Murph's. I've read multiple threads on the subject. If there's a good thread that has step by step directions, if someone can link it, I'd appreciate it. It seems like I can reach in there with a box wrench and remove the sensor bolt simply by loosening the left fairing (the one with the fins).
Mainly trying to confirm I don't have to remove the valve cover and can get by with just swapping the seal on the sensor and bolting it back on.
Thanks,
OK