Author Topic: 2" bar risers  (Read 2559 times)

Offline anycleavers

  • Jr. Member
  • **
  • Posts: 84
  • Country: us
2" bar risers
« on: May 14, 2011, 08:01:31 pm »
New guy here, and non technical to boot. Would I have to change any of the cabling to install 2" bar risers on my '97? Thanks
"Always take the long way home."

Offline T Cro ®

  • Administrator
  • Sr. Member
  • *****
  • Posts: 1734
  • Country: us
Re: 2" bar risers
« Reply #1 on: May 14, 2011, 08:18:09 pm »
Usually not but expect to do some minor rerouting of cables and/or cutting of tight zip ties.
Tony P. Crochet
(SOLD) 01 Concours Winner of COG Most Modified in 2010
Ask me about a set of Stick Coils & Harness or Precision Shift Linkage for your C10 Concours

Offline dvitous

  • Jr. Member
  • **
  • Posts: 38
  • Country: 00
Re: 2" bar risers
« Reply #2 on: May 14, 2011, 09:07:40 pm »
Yep... cut the cable ties, and make sure you move the choke cable OUTSIDE of the cable guide that's attached to the frame.
Dan Vitous
Naperville, IL

Offline T Cro ®

  • Administrator
  • Sr. Member
  • *****
  • Posts: 1734
  • Country: us
Re: 2" bar risers
« Reply #3 on: May 14, 2011, 09:23:06 pm »
Might even have to slightly loosen the brake or clutch fitting as ever so slightly change their position and then re-tighten them.
Tony P. Crochet
(SOLD) 01 Concours Winner of COG Most Modified in 2010
Ask me about a set of Stick Coils & Harness or Precision Shift Linkage for your C10 Concours

Offline DarrellB

  • Arena
  • Jr. Member
  • **
  • Posts: 68
  • If your going to ride. Ride. Forget the trailer
Re: 2" bar risers
« Reply #4 on: May 14, 2011, 10:14:55 pm »
I really like the ones on my bike.
02 Connie with 06 Skin