Author Topic: Converted turn Signals to running red LEDS  (Read 1965 times)

Offline Daytona_Mike

  • Full Member
  • ***
  • Posts: 780
  • Country: us
Converted turn Signals to running red LEDS
« on: November 28, 2011, 08:35:49 pm »
Some time ago I changed the rear turn signals to clear lenses and changed  the clear bulbs with yellow and added an LED kit which is basically a ring of red led's around the the yellow bulb.
I cannot remember where I bought those led rings. I broke one and I want to buy replacements.
If you still have fuel in the tank, you are not lost yet
Most motorcycle problems are caused by the nut that connects the handlebars to the saddle

Offline throb

  • Full Member
  • ***
  • Posts: 214
  • Country: us
Re: Converted turn Signals to running red LEDS
« Reply #1 on: November 29, 2011, 04:06:58 am »
http://www.customdynamics.com/led_billet_circle.htm

  Would these be the ones?  Scroll to the bottom of ther page....the "Dynamic Clusters".  (Sorta describes a typical day at work!!)
'05 Concours, SISF's 2 min jet mod and exhaust cam sprocket, snarf's block off plates, risers, SS lines, fork brace, T-Cro's stick coils & shift linkage, ZZR1200 rear shock, MS rear wheel.

Offline Tele130

  • Full Member
  • ***
  • Posts: 579
  • Country: us
Re: Converted turn Signals to running red LEDS
« Reply #2 on: November 29, 2011, 06:20:16 am »
http://www.customdynamics.com/led_billet_circle.htm

  Would these be the ones?  Scroll to the bottom of ther page....the "Dynamic Clusters".  (Sorta describes a typical day at work!!)



Those are pretty cool, pricey, but cool. :thumbs:
Does this mean we get a "Re-Do" on life too?

Doug Colton
2006 Concours............nice ride!!!!!

Offline Daytona_Mike

  • Full Member
  • ***
  • Posts: 780
  • Country: us
Re: Converted turn Signals to running red LEDS
« Reply #3 on: November 29, 2011, 07:47:13 am »
not the one I am looking for but the idea is the same.  I am looking for a ring of red led's that tightly fit the standard bulb already  installed.
I think the website was called Interconnect- or Electrical Connect.. something like that.

You jogged my memory and I found them. Thanks
http://www.electricalconnection.com/other-lighting/tsk-std.htm

I just got off the phone with them and they were really nice and sent me just the one side I needed. I broke one side when I bumped  the bike against my car.
If you still have fuel in the tank, you are not lost yet
Most motorcycle problems are caused by the nut that connects the handlebars to the saddle