Author Topic: Bearinged up shifter  (Read 21281 times)

Offline mikeboileau

  • Arena
  • Full Member
  • ***
  • Posts: 804
  • Country: us
  • It ain't easy bein cheesy....
Re: Bearinged up shifter
« Reply #30 on: June 09, 2011, 10:19:41 pm »
DETAILS!!!

please.....

 8)

Offline Murph

  • Full Member
  • ***
  • Posts: 123
Re: Bearinged up shifter
« Reply #31 on: June 11, 2011, 07:39:08 pm »


Details?? ..L.. I was hoping to work in a photo shoot and write the instructions today but that didn't happen.

But here ya go.. For all the parts shown in the photo below you have to send murph $20 8), If you want me to send you a shifter all bearinged up and ready to bolt on that will set you back $90. If you choose that option and send me your shifter I'll credit you $50, or if you want to send me your shifter and have me install the parts and ship it back to you, that will be $35...

Hows that?

Murph
COG 2769
Industry Member

Offline 556ALPHA

  • Sr. Member
  • ****
  • Posts: 1284
  • Country: us
  • 2009 Candy Diamond Red
Re: Bearinged up shifter
« Reply #32 on: June 11, 2011, 08:01:45 pm »
Are the bearings pressed in?  Just trying to figure out the install requirements.  Thanks

Offline Murph

  • Full Member
  • ***
  • Posts: 123
Re: Bearinged up shifter
« Reply #33 on: June 11, 2011, 08:30:29 pm »


They are

But a nice easy press, a c-clamp or vise works just fine..

Murph
COG 2769
Industry Member

Offline crashdb

  • Full Member
  • ***
  • Posts: 139
  • 2010 C14
Re: Bearinged up shifter
« Reply #34 on: June 11, 2011, 10:53:35 pm »
Murph, the order in the picture, is that the order they get pressed into the shifter arm? 
I feel like a new person!

Offline CrashKLRtoConnie

  • Full Member
  • ***
  • Posts: 231
  • Country: us
Re: Bearinged up shifter
« Reply #35 on: June 12, 2011, 09:53:10 am »
Murph

Just went to your web site to order a kit...

http://www.murphskits.com/catalog/index.php?cPath=130

Could not find shift bearing kit ...

How do we order? (Do we just send you an email or paypal?)

Brent
2008 C14 GTR1400 AKA "Connie"

Offline Murph

  • Full Member
  • ***
  • Posts: 123
Re: Bearinged up shifter
« Reply #36 on: June 12, 2011, 10:19:21 am »


They aren't on the site yet for now I'll take a few orders via paypal.

For the order it is
Stainless shim, bearing, bushing,bearing, bushing,bearing and stainless shim.
When you have the shifter off the bike its easy to knock out the plastic bushing. I opened my vice jaws wide enough for the bearing to pass through and knocked it out using a 1/2in bolt and small hammer.
After that I took the first bearing, and using the vise, pushed it in from one side. Remove the shifter with its one new bearing, and using the bolt place the rest of the assembly in the hole from the opposite end. The bearing you have installed will act as a guide for the rest.  Place a socket on the side that has the new bearingso the bolt can pass through, push on the bolt head with the vise, and when you feel it get "snug" your there..

Hows that?
I've got a list of  "have too" projects today but hope I make it to havingthis listed at the site tonight..till then paypal will work. I have the parts to sent out three shifters complete and about 13 more bearing kits..

Let me know

Murph
COG 2769
Industry Member

Offline CrashKLRtoConnie

  • Full Member
  • ***
  • Posts: 231
  • Country: us
Re: Bearinged up shifter
« Reply #37 on: June 12, 2011, 10:45:12 am »
What email for paypal?
2008 C14 GTR1400 AKA "Connie"

Offline OCK913

  • Arena
  • Full Member
  • ***
  • Posts: 363
  • Country: us
    • The Orlando Riders Club
Re: Bearinged up shifter
« Reply #38 on: June 12, 2011, 12:17:45 pm »
Murph, I want a set like you have pictured there. What is your Paypal address and I will send it over.
« Last Edit: June 12, 2011, 05:44:01 pm by OCK913 »
.............................................................
            2009 Kawasaki C14 - Black

Offline speedfreak

  • Newbie
  • *
  • Posts: 6
Re: Bearinged up shifter
« Reply #39 on: June 12, 2011, 04:38:00 pm »
Murph,  I want a kit.  Let me know where to send the money.

Offline 556ALPHA

  • Sr. Member
  • ****
  • Posts: 1284
  • Country: us
  • 2009 Candy Diamond Red
Re: Bearinged up shifter
« Reply #40 on: June 12, 2011, 04:45:23 pm »
I'm in for the 20.00 set, waiting for Paypal info.

Offline SparX

  • Newbie
  • *
  • Posts: 13
  • Country: us
Re: Bearinged up shifter
« Reply #41 on: June 12, 2011, 05:09:58 pm »
I'm in for a set as well.

-SparX
-SparX

Offline Murph

  • Full Member
  • ***
  • Posts: 123
Re: Bearinged up shifter
« Reply #42 on: June 12, 2011, 07:10:07 pm »

Guys..
Sorry it looks like I'll not have em' on the site today.
.paypal to
murph (at) murpskits.com    ya'll know to use @ in there :P notice it is not "murphskits"
$20 will do it.. 

Be sure to note its for "Bearinged up shifter" pack..

Murph
COG 2769
Industry Member

Offline mikeboileau

  • Arena
  • Full Member
  • ***
  • Posts: 804
  • Country: us
  • It ain't easy bein cheesy....
Re: Bearinged up shifter
« Reply #43 on: June 13, 2011, 08:56:19 am »
Couldn't you source a button head allen bolt for this?  It would look cleaner.

Offline COGnosticat0r

  • Full Member
  • ***
  • Posts: 273
  • Country: us
Re: Bearinged up shifter
« Reply #44 on: June 13, 2011, 09:16:07 am »
Guys..
Sorry it looks like I'll not have em' on the site today.
.paypal to
murph (at) murpskits.com    ya'll know to use @ in there :P notice it is not "murphskits"
$20 will do it.. 

Be sure to note its for "Bearinged up shifter" pack..

Murph
COG 2769
Industry Member

You got money and mail   ;)
Jerry Holland
COG 4478
2013 C14
"Man, you were haulin' ass the other day when I passed you"