Author Topic: do risers for 08/09 models fit the 10+?  (Read 2691 times)

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
do risers for 08/09 models fit the 10+?
« on: March 12, 2012, 04:26:19 pm »
The bars are the same right? Or aren't they??

Offline gPink

  • Arena
  • Hero Member
  • *****
  • Posts: 5638
  • Country: us
  • MMVIII C XIV
Re: do risers for 08/09 models fit the 10+?
« Reply #1 on: March 12, 2012, 04:42:31 pm »
I would think the bars and bolt pattern is the same but the brake and clutch lines might be different.
Thank God for good men willing to do extreme violence.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8461
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #2 on: March 12, 2012, 05:36:29 pm »
The bars are the same right? Or aren't they??

The bars are compatible, to the best of my knowledge.
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline Kas

  • Jr. Member
  • **
  • Posts: 54
Re: do risers for 08/09 models fit the 10+?
« Reply #3 on: March 12, 2012, 06:06:18 pm »
They do fit, the issue is the clearance for the glove box mounted on the gas tank.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8461
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #4 on: March 12, 2012, 07:42:45 pm »
They do fit, the issue is the clearance for the glove box mounted on the gas tank.


Good point.  Although I don't think that is an issue EXCEPT for the new "Damn Potholes" risers http://www.zggtr.org/index.php?topic=7271.0  which have a big offset.
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: do risers for 08/09 models fit the 10+?
« Reply #5 on: March 12, 2012, 07:54:31 pm »
They do fit, the issue is the clearance for the glove box mounted on the gas tank.

 ???
I'm asking if 08/09 risers will fit on a 10+, the 10+ does not have the center glove box so I wouldn't think that would be an issue since there's even more room there on a 10+?? Or did I misread your post?  :-\

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8461
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #6 on: March 12, 2012, 08:11:18 pm »

 ???
I'm asking if 08/09 risers will fit on a 10+, the 10+ does not have the center glove box so I wouldn't think that would be an issue since there's even more room there on a 10+?? Or did I misread your post?  :-\

LOL!  He misread your topic, and I just followed along with it :)

The clearance issue would only be on using risers designed for 2010+ on an older model that still has the tank-mounted glovebox.  But the only risers I know of with an interfering offset like that would be the ones I mentioned, above.  I don't think it matters with any other "brand".
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: do risers for 08/09 models fit the 10+?
« Reply #7 on: March 12, 2012, 08:23:12 pm »
LOL!  He misread your topic, and I just followed along with it :)

The clearance issue would only be on using risers designed for 2010+ on an older model that still has the tank-mounted glovebox.  But the only risers I know of with an interfering offset like that would be the ones I mentioned, above.  I don't think it matters with any other "brand".

No worries, I fugured as much Max.
 
The risers in question are Genmar 1.5" risers that are from an 08, just confirming they'll work on LivnLoud's 11...

Offline 556ALPHA

  • Sr. Member
  • ****
  • Posts: 1284
  • Country: us
  • 2009 Candy Diamond Red
Re: do risers for 08/09 models fit the 10+?
« Reply #8 on: March 12, 2012, 08:29:49 pm »
Should be no reason they will not.  Only issues come when going from 2010 to 2009 due to box as stated.

Offline maxtog

  • Elite Member
  • ******
  • Posts: 8461
  • Country: us
  • 2011 Silver
Re: do risers for 08/09 models fit the 10+?
« Reply #9 on: March 12, 2012, 08:33:48 pm »

No worries, I fugured as much Max.
 
The risers in question are Genmar 1.5" risers that are from an 08, just confirming they'll work on LivnLoud's 11...

Yep- Genmar is just a simple, straight-up riser.  Will fit any C14
Shoodaben (was Guhl) Mountain Runner ECU flash, Canyon Cages front/rear, Helibars risers, Phil's wedges, Grip Puppies, Sargent World seat-low & heated & pod, Muzzy lowering links, Soupy's stand, Nautilus air horn, Admore lightbar, Ronnie's highway pegs, front running lights, all LED, helmet locks, RAM Xgrip, Sena SMH10, Throttle Tamer, MRA X-Creen, BearingUp Shifter, PR4-GT, Scorpion EXO-T1200,etc

Offline ZG

  • Arena
  • Hero Member
  • *****
  • Posts: 6677
  • Country: us
Re: do risers for 08/09 models fit the 10+?
« Reply #10 on: March 12, 2012, 09:18:35 pm »
Should be no reason they will not.  Only issues come when going from 2010 to 2009 due to box as stated.
Yep- Genmar is just a simple, straight-up riser.  Will fit any C14

Thanks for the help brutha's, that's the answer we were wanting to hear...  :grouphug:

Offline Gumby

  • Arena
  • Sr. Member
  • ****
  • Posts: 1320
  • Country: us
  • Black 2011
Re: do risers for 08/09 models fit the 10+?
« Reply #11 on: March 13, 2012, 07:25:57 am »

Thanks for the help brutha's, that's the answer we were wanting to hear...  :grouphug:

+1