Author Topic: Wiring aux. lights  (Read 3568 times)

Offline sgilbert14

  • Full Member
  • ***
  • Posts: 253
rattle
« Reply #15 on: March 26, 2012, 07:42:56 am »
I will be wiring in the relay and the lights as above this week. Waiting for my other stuff to arrive so that I can do it all at once.

I di fixed the rattle. Turns out that it was the cam adjuster not tighting up the chain. Once I did the "bolt backoff and tap trick" the engine now purrs. I did try this once before but just did not back things out enough. :)

Offline kzz1king

  • Full Member
  • ***
  • Posts: 829
  • Country: us
Re: Wiring aux. lights
« Reply #16 on: March 26, 2012, 06:35:31 pm »
Where are you all mounting your switches for easy access on the run?
Wayne
2010 CONCOURS
1974 Z-1

Offline sgilbert14

  • Full Member
  • ***
  • Posts: 253
Re: Wiring aux. lights
« Reply #17 on: March 28, 2012, 10:49:52 am »
My light switch is mounted just under the right pocket cover. I ordered a round waterproof LED rocker switch from eBay and then drilled a hole to mount the switch. It makes me take my hand off the gas but with the LED I can tell if it is on or off and is easy to reach,